Technical data
| 0,1378″–3/8″ | |
| Weight of tool with rolls | 0.5 kg |
| Weight of shank | 0.2–0.4 kg |
| closing device | 0.5 kg |
HELIX axial rolling system RG6-S
Every stationary HELIX axial rolling system can be upgraded with a closing device (pneumatic or coolant-operated).
Operating pressure 6–12 bar required
Using the appropriate knurling rolls, you can also produce various knurls with the HELIX rolling systems.
HELIX axial-rolingl system RG-10-S
| Metric ISO thread DIN 13 standard and fine thread | M3.5–M6 |
| American UN/UNC/UNF/ UNEF/UNS thread ASME B1.1 | UN/UNC/UNF/UNEF #6 – #12 |
| Whitworth standard thread BS84 (BSW) | BSW3/16″–7/32″ |
| Whitworth fine thread BS84 (BSF) | BSF3/16″–7/32″ |
Shank Ø
| Schaft-Ø D Shank-Ø D mm (Zoll / Inch) | d mm | L mm | Ls mm | L1 mm | L2 mm | L3 mm | G |
| 15.875 (5/8″) | 6.5 | 30 | 25 | 5 | – | – | M10-LH |
| 16 | 6.5 | 30 | 25 | 5 | – | – | M10-LH |
| 19.05 (3/4″) | 6.5 | 30 | 25 | 5 | – | – | M10-LH |
| 20 | 6.5 | 30 | 25 | 5 | – | – | M10-LH |
| VDI 20 | 6.5 | 58 | 40 | 18 | 5 | 50 | – |
HELIX 6: Thread sizes
| Metrisches ISO-Gewinde DIN 13 | Helix RG6S / RG6-R |
| M3.5 × 0.6 | X |
| M3.5 × 0.5 | X |
| M4 × 0.75 | X |
| M4 × 0.7 | X |
| M4 × 0.5 | X |
| M4.5 × 0.75 | X |
| M5 × 0.9 | X |
| M5 × 0.8 | X |
| M5 × 0.75 | X |
| M5.5 × 0.75 | X |
| M6 × 1 | X |
| M6 × 0.75 | X |
Unified threads ANSI B1.1
| Unified-Gewinde | Helix RG6-S / RG10-R |
| #6-40UNF | X |
| #8-32UNC | X |
| #8-36UNF | X |
| #10-24UNC | X |
| #10-32UNF | X |
| #12-24UNC | X |
| #12-28UNF | X |
| #12-32UNEF | X |
Whitworth threads B. S. 84
| Whitworth-Gewinde B. S. 84 | Helix RG6-S / RG6-R |
| 3/16″-24BSW | X |
| 3/16″-32BSF | X |
| 7/32″-24BSWS | X |
| 7/32″-28BSF | X |