Tangential Rolling Systems with front mounted rolls: Exclusively at Wagner

B13-VB und B16-VB

Wagner Tangential Thread Rolling Systems are now available with front mounted rolls. Thanks to these rolls it is possible to roll threads directly in front of a collar or a chuck. This can all be done in very short process times and in constant premium thread quality throughout the entire length of the thread.

So far, the front mounted rolls are available for the types B13 and B16. They are designed for the use on all current turning machines with a controlled feed motion.

The working range for B13-VB varies from diameter 3 to 24 mm with a maximum pitch of 1.5 mm. For B16-VB a working range from diameter 13 to 42 mm with a maximum pitch of 2 mm is possible.

All Wagner Tangential Thread Rolling Systems are suited for the chip-free shaping technology of threads close up to a collar or very short threads. It is also possible to roll threads with very short run-out or threads where the end of the workpiece is not free.

Go back